|
|
Post by RobertsClif on May 25, 2021 1:30:46 GMT
I have 3D Printed three Dino clips so far and none have printed working. The clip pins are either stick to the hole and break during the first movement, one even fell into four pieced when I trying to engage the clip. The original Prusa Bag Clips works most every time, will adjust this Dino clips clip setting and try some more.
|
|
|
|
Post by Xayoz on May 25, 2021 11:32:15 GMT
odd...dino clips worked great for me. maybe try the 3 colour .3mf as that is the one working for me. although I am only using 2 colours, just to distinguish the eye.
|
|
|
|
Post by RobertsClif on May 25, 2021 11:58:33 GMT
Good Ideal?
Oops my downloaded zip file has no .3mf files will have to look further to find.
|
|
|
|
Post by RobertsClif on May 26, 2021 0:46:36 GMT
What happened to my 3D Prints
|
|
|
|
Post by Xayoz on May 26, 2021 11:34:00 GMT
|
|
|
|
Post by RobertsClif on May 26, 2021 13:25:03 GMT
Thank You I could not find the Dino clip the other day.
Today I found the reason my search was in vain. I was searching for a Bag Clip when should have been searching for a Cam Clip, this is what happen when we get in a hurry...
|
|
|
|
Post by martin on May 29, 2021 2:28:36 GMT
I’ve printed off a couple on my corexy with 0.6 nozzle. Was surprised it worked, and needed a bit of ooomph to get them to open, but they held together. That was pla at 215 though, so pretty good layer adhesion.
|
|
