|
Post by RobertsClif on Dec 25, 2021 20:50:35 GMT
All users;
Found a RC Snowblower STP file on the internet 35mb this was the easy part. Found a way to change it into a much larger STL file 150mb.
Still have not found a way to get the individual parts from the STP or STL file.
I imported the STP file in FreeCad then exported a STL file though most likely did this incorrectly as not familiar with FreeCad.
Need help from the anyone who has an answer for me.
|
|
|
Post by RobertsClif on Dec 25, 2021 21:34:55 GMT
Found this on FreeCAD Forum.
My Search on google.com
"How to remove individual part from a STP file"
First User
Yes, you can explode the compound or import the step with the appropriate options Preferences->Import-Export->ExpandCompoundShape.
Second User
Just to say on my system the STEP import option had 'Enable Compound Merge' set which means the whole STEP file comes in as a Single Compound.
Changed now I can see more information about model
An I also found a forum of resources for my new Program FreeCad
|
|
|
Post by RobertsClif on Dec 29, 2021 13:37:14 GMT
OK I split the Step file only to find that will not be able to print this file until finishing upgrading my MPCNC to 3D Print.
|
|
|
Post by Xayoz on Dec 30, 2021 11:14:42 GMT
won't fit on your other printers?
|
|