Post by RobertsClif on Mar 10, 2022 13:10:08 GMT
Posted to Prusa Printers > Nasa Wrench within a day received a message that a .3mf file had been uploaded of Nasa Wrench using 0.3mm_PETG_MK3S.
Quickly converted it from PETG to PLA, changing to my 3D Printer configurations an am currently printing another Nasa Wrench.
From what I am seeing at the 50% mark of 3D Printing the Nasa Wrench will make a very nice looking printed model indeed.
The .3mf Nasa Wrench printed completely in working condition noting that needed to have the nozzle .025mm higher and my parts cooling fans blowing more air.
It sounds like I may want to do an extruder calibration I hear a little extruder skipping. Do not believe is caused any trouble but can not hurt to calibrate.
At the same time I may calibrate the X,Y an Axis. This will actually be the first time I have ever done a calibration of the type.
Have always used the stock numbers 80, 80, 1600, 94.4962144
This Nasa Wrench has a tighter working mechanism than any I have 3D Printed
