|
|
Post by RobertsClif on Mar 5, 2023 15:21:33 GMT
What is your preferred Slicer: Superslicer or Prusaslicer
I currently am using Prusaslicer, though am not sure which has better features.
Should probably incorporate Superslicer in too my slicers, do some extensive testing to determine the best slicer.
|
|
|
|
Post by Xayoz on Mar 7, 2023 12:41:39 GMT
I used superslicer for a while for better tips on my MMU2S, but after I got it tuned in well, I just use PrusaSlicer all the time now
|
|
|
|
Post by RobertsClif on Mar 7, 2023 23:09:32 GMT
I use PrusaSlicer most of the time, Still like the learning process and posting what was learned.
|
|
|
|
Post by Xayoz on Mar 8, 2023 12:52:13 GMT
Have you tried Bambu yet? I haven't looked at it, but I understand it's a clone of PS
|
|
|
|
Post by RobertsClif on Mar 8, 2023 13:55:38 GMT
Can not remember if I have.
Just as PrusaSlicer is a fork of Slic3r, SuperSlicer an Bambu is a fork of the Prusa software, So SuperSlicer is indirectly another form of the original Slic3r
These three forks of Slic3r are different an went their own directions now can boast as independent slicers.
Anyone who have used Slic3r, prusaslicer, Bambu or SuperSlicer knows this, every place you read about these three slicers it is stated.
Being such a long time not using Bambu or SuperSlicer I need to gather more information as too their strengths an weaknesses for my benefits..
After reacquiring said knowledge will post my discoveries or opinions as to which is a better slicer and what each slicer is capable of.
This could be quite interesting.
|
|
|
|
Post by RobertsClif on Mar 10, 2023 20:30:40 GMT
While .3mf files will load into SuperSlicer from PrusaSlicer. Bambu Studio errors during loading of the 3mf files..
Bambu Studio will not except the modifier information making the modifier part of the STL model.
Does not look good for Bambu Studio I have learned an use the modifier in many model an is a must for quality prints.
|
|
