|
|
Post by RobertsClif on Apr 11, 2023 16:26:54 GMT
This is by far the longest 3D Printed model my 3D Printers have ever printed.
Will post more as the model is cleaned up
 |
|
|
|
Post by RobertsClif on Apr 12, 2023 12:58:05 GMT
This record breaking model for my 3D Printers was printed with the some of the following settings, as some settings on Hictop 3D Printer are only usable with Hictop.
Using PrusaSlicer 2.5.0
Perimeters 2 Solid Layers 3 Seam Random
infill of 15% Fill Pattern Monotonic Skirt 2 loops
Layer height 0.15 Hot End temp 206C Beds Temp @ 50C
An my Startup - G-Code
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F150
M117 My Print...
G28 X0 Y0
G1 E4.0 ;prime extruder
G92 E0 ;reset extruder length
M420 S1 ; Bed Leveling On
M106 P0 S128 ; P1 = 1st Fan
M106 P1 S128 ; P1 = 2nd Fan
M220 S32.000000
Note That I always turn on Bed Leveling using the G-Code
An that I have dual Fans not dual Extruders, I thought that having more control of cooling was more important than the Dual Extruders. I believe it was more important keeping my models cooling under control that the extra extruder I always set start Print Speed at 32 then using Prusa Slicer set the 2nd printed layer to my desired print speed depending the complexity of the model to be printed.
|
|
