Orca Slicer 1.6.2

github.com/SoftFever/OrcaSlicer/releases/

Orca Slicer

Build Win64 Build Mac AppleSilicon Build Mac Intel Build Linux
Orca Slicer is a fork of Bambu Studio. It was previously known as BambuStudio-SoftFever.
Bambu Studio is based on PrusaSlicer by Prusa Research, which is from Slic3r by Alessandro Ranellucci and the RepRap community. Orca Slicer incorporates a lot of features from SuperSlicer by @supermerill

Prebuilt binaries are available through the github releases page.
Main features

Auto calibrations for all printers
Sandwich(inner-outer-inner) mode - an improved version of the External perimeters first mode
Precise wall
Klipper support
More granular controls
More features can be found in change notes


This is an official release of V1.6.2.
It includes bug fixes that were present in the v1.6.2 beta and also features new built-in profiles.
Changes:
New features:

Custom printer profiles Now you can add your custom printer model with ease.
image

OrcaArena printers
A built-in profile with identical Bambulab X1C settings but for Klipper printers. (note: don't forget to enable gcode_arcs support in your printer.cfg)
image
Image courtesy: Przemek P, CC BY-SA 3.0 creativecommons.org/licenses/by-sa/3.0, via Wikimedia Commons

Original PrusaSlicer speed gradient color for GCodeViewer, provide better readability by @emanuelegiannuzzi in #800
image

Bug fixes:

Disabling acceleration control persists single M204 command in gcode #795
Fixed an Pressure Advance calibration issue(line) for delta machines #803
Fix some wrong top_surface_line_width values for VzBot machine.
update some settings for FLSun V400 profile

Newly supported printer models:

Added profile for SecKit SK-Tank by @scottmudge in #858
Add Qidi Printer Profiles by @fr3ak2402 @musicdad12 in #873

Translations:

fix typo by @hliebscher in #665

fix some typos by @hliebscher in #865

Updated Translation / Fixed Dark Mode in Machine Tab by @guilouz in #866

Fix new de.po by @hliebscher in #872

For more information about the changes made to version 1.6.2, please refer to github.com/SoftFever/OrcaSlicer/releases/tag/v1.6.2-beta

NOTE:

1. Please check here for installation instructions.
2. If your profiles didn't show up after updating, please restart OrcaSlicer
3. Klipper users, please update Moonraker to the latest version so that it can recognize OrcaSlicer and parse metadata like thumbnails.
4. If you're running Klipper, it's strongly recommended to add the following configuration to your printer.cfg file.

# Enable object exclusion
[exclude_object]

# Enable arcs support
[gcode_arcs]
resolution: 0.1