|
|
Post by Xayoz on Mar 2, 2024 12:16:29 GMT
So, I just learned a thing....
I have a 3MF file that was sliced on Bambu Slicer. I went to open it on Prusa Slicer and it won't open. So I downloaded Bambu Slicer and it opens beautifully with all the colour painting done. If I then save it as "generic" 3MF, I can open it on Prusa Slicer, but it opens the same as an STL, with no colour changes.
Does anyone know a way to "convert" the 3MF between slicers and keep the colour changes intact?
|
|
|
|
Post by RobertsClif on Mar 4, 2024 16:28:36 GMT
Found the post below where they did this in reverse, kind or.
From calmkelp at the bottom
|
|
|
|
Post by RobertsClif on Mar 5, 2024 2:31:31 GMT
Posted on another 3D Printer forum hope someone has a answer.
|
|
|
|
Post by Xayoz on Mar 5, 2024 13:44:16 GMT
lol...link goes to Reddit post on driving with hazard lights on
|
|
|
|
Post by RobertsClif on Mar 5, 2024 13:57:29 GMT
Well do not know what happened though I fixed the link. I got a reply from Dust
Post 3MF file will try to help
|
|
|
|
Post by Xayoz on Mar 6, 2024 12:17:02 GMT
Can't post it as it is not a free model.
got the generic to open, painted the colours, but then the printer lays down the first colour then just starts ghost printing.
|
|
|
|
Post by RobertsClif on Mar 8, 2024 0:47:53 GMT
I found they have a Prusa i3 printer settings for bambu slicer. hereIs this worth trying to test using your 3D Printer.
|
|
|
|
Post by Xayoz on Mar 8, 2024 12:23:59 GMT
Bambu actually has a native MK3S profile as well, but no profile with MMU2S for the multi colour printing
|
|
|
|
Post by Xayoz on Apr 6, 2024 12:00:51 GMT
And with PrusaSlicer 2.7.4, it can now open the 3MF from Bambu and keep the colour painting  |
|
|
|
Post by RobertsClif on Apr 6, 2024 13:47:49 GMT
I need to upgrade to PrusaSlicer 2.7.4 then, though do not have a color 3D Printers yet.
Well will still have the latest and greatest PrusaSlicer.
|
|
