|
Post by torque2spec on Jan 26, 2021 23:37:52 GMT
Hi, If this doesn't belong here please remove. I'm still new to the site. I like most people fell down the YouTube rabbit hole watching 3d printer videos. Pulled the trigger on the BLTouch level sensor 3.1 for my CR-10S with Board V2.2. Thought I had it down as far as the install went, the sensor does NOT come with plug and play connectors (for the 10s) and in the videos I saw you have to make jumper connections (Dupont line connectors) to plug to the main board. I went out to my not so local Microcenter and got what I thought I needed. see pics below.
So I picked this up, they didn't just have Dupont female connectors, so I had to get the premade ones.. Came home ready to knock this out... Almost none of this is needed, aside from the shrink wrap. Allow me to help you save money unlike silly me. So I got home and laid everything out and was ready to get started. I know how to solder so that wasn't a problem. I started thinking "This is kind of annoying there should be a easier way." Then it hit me. I de pinned the stock connector it comes with instead of cutting it off and soldering the new terminals on. the metal ends hug the jumper pins nicely.
Cut small shrink wrap for each end and put them on. Ready to go.. I have the V2.2 main board but I think 2.0 and 2.1 are similar. Put them on and they grab hold nicely, not loose at all. Easy and free, no extra headache to deal with if you don't have everything to just make things work. I totally could have saved myself a trip to MC but honestly I love that store so I'm not even mad! Any auto store will have wire shrink wrap.
Hope this helps someone someday!
|
|