Post by RobertsClif on Mar 18, 2021 13:41:29 GMT
Almost 2 year ago I shorted out the AMS1117 three times, I found this adjustable voltage regulator module.
I replaced Ramps D1 with a 12volt 3amp Dc-Dc step down converter so I could power the Ramps using 24VDC and supply 12v to the Arduino.
I replaced Ramps D1 with a 12volt 3amp Dc-Dc step down converter so I could power the Ramps using 24VDC and supply 12v to the Arduino.
Then replaced the 5 volt AMS1117 regulator with the same regulator this time set to 5volt 3amp to replace the AMS1117-5.0
The AMS1117-5.0 dies this part is extremely fragile replacing with the 3amp Dc-Dc step down converter was a Plus.
The AMS1117-5.0 dies this part is extremely fragile replacing with the 3amp Dc-Dc step down converter was a Plus.
Using a standard 24volt power supply for the Ramps 1.6 / Arduino was extremely beneficial.
